Manticore Six Post Power Rack Builder (3" x 3", 1" Holes)
Build Your Rack
Customize your Rack
- 108"
- 90"
- 84"
- 72"
- 43" Depth
- 30" Depth
- 24" Depth
Rear Rack Depth
- +17"
- +24"
- +30"
Pull-Up Bar
-
Fat/Skinny Pull Up Bar
Fat/Skinny Pull Up Bar
2-in-1 is more fun with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.Or throw on a Cable Pulley to simulate cable machine exercises at home.
This double pull up bar has a standard diameter bar and a fat grip bar with rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$84.99+ ADD -
Multigrip Pull Up Bar
Multi-Grip Pull Up Bar
Raise the bar on your strength training with this upgraded pull-up bar.
Choose from the built-in standard bar, fat grip bar, or neutral grip to keep things spicy. Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
The Multi-Grip Pull Up Bar has an ergonomic design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$129.99+ ADD -
Adjustable Straight Pull Up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes & knurling offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower. Hardware included.
2.3"x2.3" bare steel: Fits our 2.3" racks & Cable Towers, 1.25" diameter, bare steel finish & includes hitch pins
2.3"x2.3" knurled stainless: Fits our 2.3" racks & Cable Towers, 1" diameter, stainless steel finish, moderate knurling & includes hitch pins
Hydra powder coated: Fits our Hydra racks, 1.25" diameter, light textured black powder coat finish & includes hitch pins
Manticore powder coated: Fits our Manticore racks, 1.25" diameter, light textured black powder coat finish, includes quick-locking mag pins & UHMW lining inside to protect your rack
IMPORTANT: Both 2.3" pull-up bars are NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them.
$99.99+ ADD -
43" Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$59.99+ ADD -
Globe Pull Up Bar + 43" Crossmember
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$169.99+ ADD
Middle Cross Piece
-
Logo Plate Crossmember
Logo Plate Crossmembers
Ritz up your rack with a deluxe Logo Plate Crossmember!
The Hydra version provides an aesthetic all-black design and B.o.S logo to elevate the look and feel of your Hydra rack. Fits the Hydra power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 5/8" holes that have an inner width of 43 inches.
The Manticore version features a brushed-metal logo plate, crafted to elevate the look and feel of your Manticore Rack. Fits the Manticore power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 1-inch holes that have an inner width of 43 inches.
Hardware included.
IMPORTANT: The Manticore version requires a separate 43-inch crossmember to mount the logo plate, which is not included by default.
$149.99X OUT OF STOCK -
Backordered - Ships 2025/02/0443" Crossmember
Manticore Crossmembers
Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes?
Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferences. They add stability and strength to your rack, while opening it up to more possibilities for your training. Mount band pegs, utility horns, and other rack attachments.
Unless otherwise indicated, crossmembers are sold in pairs (2 pieces). Crossmembers include all standard hardware (M24 120mm bolts) to connect to uprights
IMPORTANT: Requires two 36mm wrenches to install (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.
NOTE: If you're looking to connect two cross-members to opposite sides of an upright, like for a 6-Post Rack, you need to purchase long bolt sets (M24 130mm bolts).
$79.99X OUT OF STOCK
Back Cross Piece
-
Logo Plate Crossmember
Logo Plate Crossmembers
Ritz up your rack with a deluxe Logo Plate Crossmember!
The Hydra version provides an aesthetic all-black design and B.o.S logo to elevate the look and feel of your Hydra rack. Fits the Hydra power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 5/8" holes that have an inner width of 43 inches.
The Manticore version features a brushed-metal logo plate, crafted to elevate the look and feel of your Manticore Rack. Fits the Manticore power rack line-up and select non-B.o.S. racks with true 3" x 3" uprights & 1-inch holes that have an inner width of 43 inches.
Hardware included.
IMPORTANT: The Manticore version requires a separate 43-inch crossmember to mount the logo plate, which is not included by default.
$149.99X OUT OF STOCK -
43" Straight Pull Up Bar
Straight Pull Up Bar
Raise the bar on your strength training with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
This straight pull up bar has a standard 32mm diameter and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$59.99+ ADD -
Backordered - Ships 2025/02/0443" Crossmember
Manticore Crossmembers
Looking to upgrade your Manticore Rack? Or build your own franken-rack? Maybe even upgrade your non-Bells of Steel Rack that's also true 3 x 3 inch with 1-inch holes?
Uprights are the vertical bars that connect the crossmembers of your power rack. They're easy to install and come in different lengths and styles to suit your needs and preferences. They add stability and strength to your rack, while opening it up to more possibilities for your training. Mount band pegs, utility horns, and other rack attachments.
Unless otherwise indicated, crossmembers are sold in pairs (2 pieces). Crossmembers include all standard hardware (M24 120mm bolts) to connect to uprights
IMPORTANT: Requires two 36mm wrenches to install (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.
NOTE: If you're looking to connect two cross-members to opposite sides of an upright, like for a 6-Post Rack, you need to purchase long bolt sets (M24 130mm bolts).
$79.99X OUT OF STOCK -
Fat/Skinny Pull Up Bar
Fat/Skinny Pull Up Bar
2-in-1 is more fun with this power rack staple.
Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.Or throw on a Cable Pulley to simulate cable machine exercises at home.
This double pull up bar has a standard diameter bar and a fat grip bar with rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$84.99+ ADD -
Multigrip Pull Up Bar
Multi-Grip Pull Up Bar
Raise the bar on your strength training with this upgraded pull-up bar.
Choose from the built-in standard bar, fat grip bar, or neutral grip to keep things spicy. Target your back, biceps, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats. Or throw on a Cable Pulley to simulate cable machine exercises at home.
The Multi-Grip Pull Up Bar has an ergonomic design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack width and hole size. Hardware included.
$129.99+ ADD -
Globe Pull Up Bar + 43" Crossmember
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$169.99+ ADD
Rack Safeties
-
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.$209.99+ ADD -
43" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$129.99+ ADD -
43" Flip-down Safeties
Flip-Down Safeties
Don't compromise on safety when it comes to your training.
These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$259.99+ ADD -
43" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$49.99+ ADD -
24" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$49.97+ ADD -
30" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$94.99+ ADD -
30" Flip-down Safeties
Flip-Down Safeties
Don't compromise on safety when it comes to your training.
These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$219.99+ ADD -
30" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$45.99+ ADD -
24" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$42.99+ ADD
J-Cups
-
Manticore J-Cups
Standard J-Cups
These tried-and-true J-Cups have UHMW protection on all sides to keep your bar evenly distributed and secure while withstanding enthusiastic re-rackings. They're more basic than pumpkin spice season, but they do the trick.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. UHMW triple-padding protects your bar & features a 700lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. UHMW triple-padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
IMPORTANT: Choose the correct J-Cup version for the uprights and hole size on your power rack. Sold in pairs.
$79.99+ ADD -
Roller J-Cups
Roller J-Cups
Our innovative Roller J-Cups make solo benching a dream. Hefty build with durable nylon rollers to protect your barbell while making adjustments smoother than Usher on roller skates. For all the bench press lovers out there, this is a must.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Includes durable nylon rollers & features a 600lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features an 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. The durable nylon rollers & UHMW double-padding protect your bar. Features a 1,000lb combined capacity. Includes quick-locking mag pins and additional UHMW inside to protect your rack.
$129.99+ ADD -
Sawndwich J-Cups
Sandwich J-Cups
The robust Sandwich J-cups are heavy-duty and a serious plus when using a safety squat bar. The beefy sandwich design, abrasion-resistant lining, and sloped backing protect your bar and you while re-racking.
60mm version: Fits our 60mm racks + cable towers & non-B.o.S. 60mm x 60mm racks with 5/8" holes. Thick HDPE padding protects your bar & features an 880lb combined capacity.
Hydra version: Fits our Hydra racks & non-B.o.S. true 3" x 3" racks with 5/8" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity.
Manticore version: Fits our Manticore racks & non-B.o.S. true 3" x 3" racks with 1" holes. Thick HDPE padding protects your bar & features a 1,000lb combined capacity. Includes quick-locking mag pins and additional HDPE inside to protect your rack.
$129.99+ ADD
Additional Options and Accessories
-
17" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$34.99+ ADD -
24" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$49.97+ ADD -
30" Pin Pipe Safeties
Pin Pipe Safeties
Don't compromise on safety when it comes to your training. These Pin Pipe Safeties offer unparalleled protection and peace of mind at a reasonable cost.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$94.99+ ADD -
30" Flip-down Safeties
Flip-Down Safeties
Don't compromise on safety when it comes to your training.
These Flip Down Safeties offer the confidence and reliability of a spotter without the weird-feeling personal space invasion.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$219.99+ ADD -
30" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$45.99+ ADD -
17" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$39.99+ ADD -
24" Strap SafetiesBlack
Safety Straps for Hydra & Manticore Racks
Don't compromise on safety when it comes to your training. Safety Straps offer unparalleled protection and peace of mind, gently catching a loaded barbell without sacrificing security.
Select the safeties that correspond with the depth and hole sizing of your power rack.
$42.99+ ADD
-
Single 36mm Wrench
Manticore Hardware
Simplify the Manticore Power Rack assembly process with this ultra-convenient hardware kit.
The 36mm wrench fits all bolts used in the Manticore line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Bolt sets are bright zinc, as is standard on the Manticore line, and come with washers and nuts.
120mm bolts are for standard connections of one crossmember to one upright, and 130mm long bolts are for connecting two crossmembers to opposite sides of an upright.
All crossmembers and attachments come with standard bolts already included, and the 6 post builder, 8" folding wall connector, and front foot stabilizer all come with 130mm bolts included.
Download BOS Logo Tag with Manticore Assembly Instructions Product Manual
$23.99+ ADD -
Magnetic Rack Attachment Pins
Magnetic Rack Attachment Pins
Replace your slow-adjusting hitch pins with sleek mag pins! Magnetic head sticks to your rack to lock in your rack attachments for total peace of mind.
The standard-sized manticore mag pin is 5.9" long, with 5.1" shaft length.
The hydra mag pin is 5.75" long, with a 5.0" shaft lengthThe shorty version is a nub; 2.2" long, with 1.4" shaft length
Sold individually.
$21.99+ ADD -
Concrete Anchors - Set of 8
Hydra Hardware
Simplify the Hydra Power Rack assembly process with this ultra-convenient hardware kit.
The 24mm wrench fits all bolts used in the Hydra line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Hardware fits true 3″ x 3″ tubing with 5/8″ holes
Download Hydra BOS Logo Tag with Assembly Instructions Product Manual
$24.99+ ADD -
Extra Logo Plate
Manticore Hardware
Simplify the Manticore Power Rack assembly process with this ultra-convenient hardware kit.
The 36mm wrench fits all bolts used in the Manticore line-up, concrete anchor bolts (set of 8) and the rack attachment pins keep your rig secure, and the B.o.S logo plate promises a PR in pizzazz.
Bolt sets are bright zinc, as is standard on the Manticore line, and come with washers and nuts.
120mm bolts are for standard connections of one crossmember to one upright, and 130mm long bolts are for connecting two crossmembers to opposite sides of an upright.
All crossmembers and attachments come with standard bolts already included, and the 6 post builder, 8" folding wall connector, and front foot stabilizer all come with 130mm bolts included.
Download BOS Logo Tag with Manticore Assembly Instructions Product Manual
$29.99+ ADD
Rack Attachments
-
Backordered - Ships 2025/01/3172" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$579.99+ ADD -
Backordered - Ships 2025/01/3184" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$579.99+ ADD -
Backordered - Ships 2025/01/3190" Lat Pulldown - Plate Loaded
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$579.99+ ADD -
Backordered - Ships 2025/01/3184" Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$1,399.99+ ADD -
Backordered - Ships 2025/01/3190" Lat Pulldown - 210 LB Weight Stack
Lat Pulldown & Low Row Rack Attachment - Hydra & Manticore
Build your back with the versatile and space-efficient Lat Pulldown Low Row Attachment.
With this rack attachment, you can do lat pulldowns, cable rows, and other cable exercises using the same machine and seamlessly switch between them while adding only 24-30" of depth and 4.5" of height to your existing rack.
The loadable steel tubing weight horns are angled to keep your Olympic Weight Plates in place, but axle collar clips will fit just right for extra security. The hefty 500lb cable capacity, 1:1 pull ratio, and 15+ attachments (lat bar and curl bar are included) offer endless training.
The non-slip footplate and included leg pad will keep you locked and loaded while repping it out, while the velvety smoothness of the aluminum pulleys gives peanut butter a run for its money.
Includes padded leg crossbar.
IMPORTANT: To fit correctly, it must match the height of your rack uprights (72", 84", or 90") if you have a flat foot rack, choose the height of the uprights attached to your flat foot. To mount this attachment, one 43" rear cross-member with holes on the top is required.
$1,399.99+ ADD
-
Backordered - Ships 2025/04/15Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$699.99+ ADD -
Backordered - Ships 2025/04/15Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$699.99+ ADD -
Backordered - Ships 2025/04/15Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$699.99+ ADD -
Backordered - Ships 2025/04/15Kraken Plate Loaded - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,299.99+ ADD -
Backordered - Ships 2025/04/15Kraken Weight Stack - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,299.99+ ADD -
Kraken Weight Stack - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
X OUT OF STOCK -
Backordered - Ships 2025/04/15Kraken Weight Stack - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,349.99+ ADD -
Backordered - Ships 2025/04/15Kraken Weight Stack - Single Side
Kraken Rack Attachment for 6 Post Manticore Racks (Single Side)
The Kraken is a compact rack-mounted cable system, turning your 3” x 3” 6-post power rack with 1” holes into a dual-handle cable tower with 5lbs to 210+lbs of resistance! All of this while maintaining the use of your barbell and rack attachments.
It comes in two versions:
- Plate-Loaded: use your weight plates to save big bucks
- Weight Stack: a convenient 210-pound stack for quick, no-fuss adjustmentsThanks to the knurled handle, nylon rollers and chrome-coated pop pins, the trolleys are adjustable with a single hand. By using your uprights’ holes for height selections, you can fine-tune the feel of nearly all your cable exercises.
The Kraken saves the clangin’ & bangin’ for your barbell lifts; its aluminum pulleys and dual guide rods deliver the kind of velvety smoothness you'd expect at a commercial gym — but without the crowds, the dude grunting in the corner, and that fit-fluencer hogging the Smith Machine for “just one more angle.”
The dual aluminum handles have 6002 bearings, rotating as smoothly as a barbell, and allow bilateral exercises from a single upright. A single cable features a 2:1 pull ratio (10lbs feels like 5lbs), tackling everything from rehab work to isolations. Plus, the cable travel offers uninterrupted focus during sport-specific drills or while getting that joooooicy bicep pump.
When connected with the cable adapter, the Kraken converts into a glorious 1:1 pull ratio — perfect for heavy lat pulldowns & low rows — with no need to buy a separate weight pack expansion down the road.
Safety is no afterthought either — the Weight Stack version features an optional Shroud that does double duty: protecting fingers (big and small) AND acting as a pegboard, keeping your cable attachments neatly stowed using their included hooks. This means more family time while keeping your little ones safe… because a home gym shouldn't need a “Caution: Dangerous Sh*t EVERYWHERE” sign.
A Single Side of the Kraken Includes:
- Two aluminum handles
- One cable adapter
- Aluminum pulley wheels
- Cables
- Trolley
- Guide rods
- Weight carriage or weight stacks
- Mounting brackets
- Mounting hardwareKraken Compatibility Chart
This Kraken configuration is compatible with the racks listed below:
Power Rack
Height Required
Crossmember Rack Depth Required
84", 90", or 108" (Requires raising the height of your crossmembers)
- 30" or 43"
- For 24" depth, use the 4-Post Kraken builder insteadNon-BoS Rack Compatibility: You don’t need one of our power racks to unleash The Kraken! This rack attachment’s mounting brackets make it an awesome addition to most 3” x 3” power racks. Plus, we’ve got affordable rack components to bridge any gaps. See? No Bells of Steel blood oath required.
IMPORTANT: Minimize single-sided cable use as it accelerates wear on the cable & pulleys and may cause cable twisting.
$1,349.99+ ADD
-
Backordered - Ships 2025/04/15Smith Machine Rack Attachment - Bar Included
Smith Machine Rack Attachment
BREAKING NEWS: the stigma against Smith machines is over! This Smith Machine Rack Attachment will supercharge your size & strength in an ultra-compact footprint. Now, if only mullets would come back in style…
This widely compatible unit upgrades your 3” x 3” power rack into a beloved bodybuilding beast without the hefty price tag or space requirements.
Bring your own 25-30mm diameter barbell (BYOB) for a higher starting weight and to optimize the attachment for your next training cycle. Or, snag the hollow 36lb Smith bar for an easier assembly & one-and-done solution for all exercises. With a 600-pound total weight capacity, it’s ready for your heaviest ambitions.
Mount this rack attachment on the inside of your rack without taking up any additional footprint in your gym, or attach it to the outside — sitting just 10" off your uprights! Change between a straight or angled bar path with a few simple adjustments to the mounting brackets, making its fixed path feel as natural as possible for your body.
Hit all the staple lifts: squats, presses, rows, and Bulgarian split squats (why are they ALWAYS here?!). But that’s just the start. Incorporate heavy negatives on compounds. Isolate individual muscles with JM presses. You can even rehab stubborn aches in your posterior chain with single-leg Romanian deadlifts.
Recommended Set-Up: Mount the upper brackets to the top of your uprights & the lower brackets to your crossmembers (inside rack) or front foot stabilizers (outside rack). Brackets can be mounted to your uprights only, but a dropped bar could permanently damage the unit.
Bells of Steel Compatibility Chart
The Smith Machine Attachment is compatible with the following Hydra & Manticore racks:
Rack Type
BYOB
Bar Included
4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only6 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Height:
-72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" onlyFlat Foot 4 Post / Squat Stand Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Folding 4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
- Width:
- 47" & 49"
*When mounted, your rack can't fold unless the bar is removed.Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*When mounted, your rack can't fold unless the bar is removed.84" Light Commercial Rack Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Non-BoS Rack Compatibility: The Smith attaches to most non-BoS power racks with the following: tubing between 2.3" x 2.3" and 3" x 3", 72" or taller uprights, 49" width (if selecting "Bar Included" version), and with 5/8" or 1" side holes (check the images with the bracket & square for precise measurements).
Download Smith Machine BYOB & Bar Included Product Manual A
Download Smith Machine Bar Included Product Manual B
Download Smith Machine BYOB Product Manual BClick here to print off the Smith Attachment Brackets and see if they will fit your rack at home!
$799.99+ ADD -
Backordered - Ships 2025/04/15Smith Machine Rack Attachment - BYOB
Smith Machine Rack Attachment
BREAKING NEWS: the stigma against Smith machines is over! This Smith Machine Rack Attachment will supercharge your size & strength in an ultra-compact footprint. Now, if only mullets would come back in style…
This widely compatible unit upgrades your 3” x 3” power rack into a beloved bodybuilding beast without the hefty price tag or space requirements.
Bring your own 25-30mm diameter barbell (BYOB) for a higher starting weight and to optimize the attachment for your next training cycle. Or, snag the hollow 36lb Smith bar for an easier assembly & one-and-done solution for all exercises. With a 600-pound total weight capacity, it’s ready for your heaviest ambitions.
Mount this rack attachment on the inside of your rack without taking up any additional footprint in your gym, or attach it to the outside — sitting just 10" off your uprights! Change between a straight or angled bar path with a few simple adjustments to the mounting brackets, making its fixed path feel as natural as possible for your body.
Hit all the staple lifts: squats, presses, rows, and Bulgarian split squats (why are they ALWAYS here?!). But that’s just the start. Incorporate heavy negatives on compounds. Isolate individual muscles with JM presses. You can even rehab stubborn aches in your posterior chain with single-leg Romanian deadlifts.
Recommended Set-Up: Mount the upper brackets to the top of your uprights & the lower brackets to your crossmembers (inside rack) or front foot stabilizers (outside rack). Brackets can be mounted to your uprights only, but a dropped bar could permanently damage the unit.
Bells of Steel Compatibility Chart
The Smith Machine Attachment is compatible with the following Hydra & Manticore racks:
Rack Type
BYOB
Bar Included
4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only6 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"Height:
-72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" onlyFlat Foot 4 Post / Squat Stand Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 47" & 49"
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*Only mounts on an angle. If you want to mount straight up & down, it requires an extra-long set of bolts and additional bushings — available for purchase soon.
**If you have a 56" Hydra Flat Foot, it can only be mounted straight up & down, and requires the Conversion Kit.Folding 4 Post Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
- Width:
- 47" & 49"
*When mounted, your rack can't fold unless the bar is removed.Height:
- 72" (outside rack on uprights only), 84", 90" & 108"
Width:
- 49" only
*When mounted, your rack can't fold unless the bar is removed.84" Light Commercial Rack Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Compatible when placed on the inside at an angle, but requires all upper crossmembers to be lowered one hole & results in the Lat Pulldown Attachment being incompatible. Non-BoS Rack Compatibility: The Smith attaches to most non-BoS power racks with the following: tubing between 2.3" x 2.3" and 3" x 3", 72" or taller uprights, 49" width (if selecting "Bar Included" version), and with 5/8" or 1" side holes (check the images with the bracket & square for precise measurements).
Download Smith Machine BYOB & Bar Included Product Manual A
Download Smith Machine Bar Included Product Manual B
Download Smith Machine BYOB Product Manual BClick here to print off the Smith Attachment Brackets and see if they will fit your rack at home!
$799.99+ ADD
-
Band Pegs with Carabiners
Band Pegs with Carabiners
Band Pegs are designed to help strengthen those sticking points and blast through plateaus. Use bands to add resistance to squats, rack pulls, benching, and more. The carabiners offer extra security if you have nightmares about bands coming unhooked and slapping you silly. Select the band pegs that match your power rack specs. Sold in pairs.$49.98+ ADD -
Standard Band Pegs
Standard Band Pegs
Band Pegs are classic band pegs to help strengthen those sticking points and blast through plateaus.
Use bands to add resistance to squats, rack pulls, benching, and more. Select the band pegs that match your power rack specs. Sold in pairs.
$59.98+ ADD -
Adjustable Straight Pull-up Bar
Adjustable Pull-up Bar Rack Attachment
The world is your oyster with this handy-dandy rack attachment. Use it as a second pull-up bar on your power rack or add it to a pair of lever arms to unlock barbell and machine-inspired exercises at home — hip thrusts, thrusters, rows, deadlifts, you name it! The beefy 6-gauge steel promises solid construction while the different finishes & knurling offer plenty of variety. With a max capacity of 500lbs, these adjustable pull-up bars are meant to withstand heavy weights. Choose the option that suits your power rack or cable tower. Hardware included.
2.3"x2.3" bare steel: Fits our 2.3" racks & Cable Towers, 1.25" diameter, bare steel finish & includes hitch pins
2.3"x2.3" knurled stainless: Fits our 2.3" racks & Cable Towers, 1" diameter, stainless steel finish, moderate knurling & includes hitch pins
Hydra powder coated: Fits our Hydra racks, 1.25" diameter, light textured black powder coat finish & includes hitch pins
Manticore powder coated: Fits our Manticore racks, 1.25" diameter, light textured black powder coat finish, includes quick-locking mag pins & UHMW lining inside to protect your rack
IMPORTANT: Both 2.3" pull-up bars are NOT compatible with our Strongman Yoke, as its uprights are slightly too wide to accommodate them.
$99.99+ ADD -
Landmine Attachment
Landmine Rack Attachment
Add versatility to your strength training routine with the Landmine attachment! Choose the version that corresponds with your power rack tubing & hole size.
The Standard version fits any rack with 5/8" holes (including our 60mm & Hydra racks) provided the tubing length or width is no greater than 3". It boasts a beefy 315lb capacity with a UHMW-lined sleeve to protect your favorite Olympic barbell as you squat, press, row, Viking Press, and twist to target different muscle groups for an explosive workout.
The Manticore version fits our Manticore racks & non-Bells of Steel racks with 1″ holes and width or length no greater than 3″. Boasting a beefy 315lb capacity, it rotates in two axes instead of one for smoother landmine workouts and locks into your rack more securely using a mag pin with UHMW protection for your rack. The inner UHMW sleeve protects your barbell and the locking pin keeps it secure so your heavy training session doesn't blow up in your face.Download Racks with 5/8" Holes - Hydra (3" x 3") and 2.3" x 2.3" Racks Product Manual
Download Manticore (3" x 3"; 1" Holes) Product Manual$94.99+ ADD -
Front Foot Stabilizer
Front Foot Stabilizers
These Front Foot Stabilizers add extra support and balance to your TRUE 3" x 3" power rack.
Can also store one barbell on each foot in a PVC-lined hole. Hardware included.
Choose the Front Foot Stabilizers that correspond with your Power Rack model.
$124.99+ ADD -
Y Dip Attachment
Y Dip Bar Rack Attachment
The heavy-duty Y Dip Attachment easily mounts to your rack for dips, knee or leg lifts, and more. Perfect for blasting your chest, delts, triceps, and core! You can even get creative and use this for neutral grip pull ups and inverted rows when you're short on space or time.
This rack attachment boasts a black powder coat to prevent rust and UHMW lining to protect your uprights and ensure a snug fit. The UHMW-lined Manticore version can be hung vertically on your upright for storage.
Easily install and adjust the height with a simple drop pin. With a 500lb weight capacity, you can throw on a Dip Belt and some Weight Plates for some extra flair.
Choose the Y Dip Attachment that matches your power rack specs.
IMPORTANT: If your rack is not bolted to the ground or otherwise secured, you must use the Y Dip Attachment on the inside of your rack.
Download Y Dip Bar Rack Attachment - 2.3" x 2.3" Product Manual
Download Y Dip Bar Rack Attachment - Hydra Product Manual$139.99+ ADD -
Seal Row Pad
Seal Row Pad Rack Attachment
Minimize fatigue, so you can finally push your back muscles to their limit! Maintain your form with chest support, minus the bulky bench. This streamlined rack attachment installs and adjusts quickly and easily, unlocking more than just seal rows-use it for flies, hip thrusts, incline curls, or a comfy chair between sets.
Say goodbye to notoriously rickety and time-consuming set ups (here's looking at you, seal rows and hip thrusts) and hello to a 30 second setup and exceptional muscle targeting.
With 7 adjustable positions, plenty of head room, 2.25" thick pad, and a beefy 500lb capacity, you'll wonder how you ever lived without it.
Select the seal row pad that corresponds with the uprights and hole size of your power rack.
Download Seal Row Pad Rack Attachment - Manticore Product Manual
Download Seal Row Pad Rack Attachment - 2.3" x 2.3" Product Manual
Download Seal Row Pad Rack Attachment - Hydra Product Manual$229.99+ ADD -
Spotter Arms
Spotter Arms Rack Attachment
You may be more than a pretty face, but dropping a loaded barbell while benching certainly won’t improve things.Stay safe while benching or squatting with the heavy-duty Spotter Arms Attachment! Or use them as a secondary squat/bench station for barbell supersets! UHMW lining protects your barbell from damage, while the Manticore version boasts extra UHMW to keep your rack uprights in tip-top shape.60mm version: compatible with our 60mm racks and non-B.o.S. 2.3" x 2.3" racks with 5/8" holes.Hydra version: compatible with our Hydra racks and non-B.o.S. racks with true 3" x 3" uprights with 5/8" holes.
Manticore version: compatible with our Manticore racks and non-B.o.S. racks with true 3" x 3" uprights with 1" holes.$209.99+ ADD -
Globe Pull-up Bar
Globe Pull Up Bar
Raise the bar on your strength training with the last pull-up bar you'll ever need.
Choose from a standard grip, neutral grip, or globe grip to keep things spicy.
Target your back, biceps, forearms, and core, or just hang around to boost your grip strength and decompress your spine after heavy squats.
The Globe Grip Pull Up Bar has an innovative design and rust-resistant black powder coat. With a 500lb weight capacity and sturdy steel construction, this bad boy was built to last.
Choose the size that corresponds with your power rack.
Requires a 43" crossmember or can be mounted on the side of your rack if it has a 43" depth. Hardware included.
$169.99+ ADD -
Leg Curl/Leg Extension
Leg Curl / Leg Extension Rack Attachment
Economically isolate your quads & hammies to build a nice set of wheels.
The Leg Extension/Curl Rack Attachment offers a machine-like feel and stability without taking up valuable real estate in your home gym. This beefy attachment has a weight plate capacity of 250lbs and a user capacity of 250lbs.
The Leg Extension/Curl unlocks seated leg extensions, so you can blast your quads but don't forget your hammies! They can be isolated one at a time with standing single-leg hamstring curls for some juicy hams worthy of Sunday dinner. Throw on some resistance bands for tension you can cut with a knife (which we do not recommend).
Choose the Leg Extension/Curl Power Rack Attachment that coordinates with your power rack uprights and hole size.
IMPORTANT: Your power rack MUST be bolted down when using the Leg Extension/Curl to ensure user and equipment safety. For maximal stability, use this attachment on the inside of your rack.
Download Manticore (3" x 3"; 1" Holes) Product Manual
Download Hydra (3" x 3"; 5/8" Holes) Product Manual
Download 2.3" x 2.3" (5/8" Holes) Product Manual$449.99+ ADD -
Lever Arms + Open Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury.
Download Lever Arm Open Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Manticore (Pair) Product Manual
Download Lever Arm Open Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Hydra (Pair) Product Manual$449.98+ ADD -
Lever Arms + Closed Handles
Lever Arms Rack Attachment
Hydra Lever Arms simulate DOZENS of machine exercises in only a fraction of the space & without a jaw-dropping price tag. Add an Adjustable Pull-Up Bar for even more versatility (hip thrusts and leg presses, anyone?)
Height and handle adjustments are simple, so you can find your perfect placement.
These space-efficient attachments (sold in pairs) add only 4.5" to the front of your rack when not in use and tuck nicely inside racks with a minimum 43" depth.
With a 500lb weight capacity and two handle styles to choose from, you're set for life.
Throw on your Olympic weight plates and a set of magnetic collars, and get lifting. Your gainz depend on it.
IMPORTANT: The Hydra Lever Arms are only guaranteed to fit on true 3" x 3" uprights with 5/8" holes. If installed on the exterior of your uprights, your rack MUST be bolted down to avoid tipping and/or injury.
Download Lever Arm Open Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Manticore (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Manticore (Pair) Product Manual
Download Lever Arm Open Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arm Closed Handles Only (No Arms) - Hydra (Pair) Product Manual
Download Lever Arms Rack Attachment Arms Only (No Handles) - Hydra (Pair) Product Manual$449.98+ ADD -
Rear Base Stabilizer
Rear Base Stabilizer
The Rear Base Stabilizer adds serious stability to your power rack. It also makes a fine seat to ponder the deepest questions in life like, "Is sumo really cheating?"
The Hydra version fits the Hydra power rack line-up and select non-B.o.S. 49-inch wide racks with true 3" x 3" uprights & 1" holes - with two of those uprights holes spaced 6" apart.
The Manticore version fits the Manticore power rack line-up and select non-B.o.S. 49-inch wide racks with true 3" x 3" uprights & 1-inch holes - with two of those uprights holes spaced 6" apart.
IMPORTANT: If you have a non-B.o.S rack, please ensure your tubing matches the above specs for a correct fit.
$124.99+ ADD -
Plate Loaded Cable Tower
Cable Tower
Can't picture yourself doing ONLY barbell exercises for the rest of your life? With just one Cable Tower, you can weave hundreds of cable machine exercises into your fitness routine and easily switch from one to another.
Dual Nylon Adjustable Handles (included) on the upright with 33 height settings create... 33, carry the 1...endless possibilities! Throw on some of our best-selling Cable Tower attachments (we recommend the Y Dip, Seal Row Pad, and Landmine) for even more versatility.
For the best rack attachment versatility, select the version that includes the rear upright—this increases its stability and offers additional storage for small items on Utility Hooks.
Olympic Weight Plate loadable sleeves keep the costs low and the possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience.
Also included is the 2-1 Cable Adapter, connecting both cables & upgrading the pull ratio from 2:1 to an incredible 1:1 ratio.
Need a rack & cable combo machine? Check out the All-In-One Trainer or Cable Tower Squat Stands.
IMPORTANT: Due to their small footprint and tall height, Cable Towers MUST be bolted down to ensure the user and equipment’s safety. Mounting hardware is not included — we recommend Tapcon+ screws. Ships unassembled.
$349.99+ ADD -
Backordered - Ships 2025/02/14Weight Stack Cable Tower
Cable Tower
Can't picture yourself doing ONLY barbell exercises for the rest of your life? With just one Cable Tower, you can weave hundreds of cable machine exercises into your fitness routine and easily switch from one to another.
Dual Nylon Adjustable Handles (included) on the upright with 33 height settings create... 33, carry the 1...endless possibilities! Throw on some of our best-selling Cable Tower attachments (we recommend the Y Dip, Seal Row Pad, and Landmine) for even more versatility.
For the best rack attachment versatility, select the version that includes the rear upright—this increases its stability and offers additional storage for small items on Utility Hooks.
Olympic Weight Plate loadable sleeves keep the costs low and the possibilities high, while the 210-pound Weight Stack version is the crème de la crème of convenience.
Also included is the 2-1 Cable Adapter, connecting both cables & upgrading the pull ratio from 2:1 to an incredible 1:1 ratio.
Need a rack & cable combo machine? Check out the All-In-One Trainer or Cable Tower Squat Stands.
IMPORTANT: Due to their small footprint and tall height, Cable Towers MUST be bolted down to ensure the user and equipment’s safety. Mounting hardware is not included — we recommend Tapcon+ screws. Ships unassembled.
$1,129.99+ ADD
Storage
-
12" Utility Horn
Utility Horn Rack Attachment
The Utility Horn easily mounts on your rack for quick access to your Olympic weight plates, bands, or chains-whatever you need handy up to 100lbs. It keeps your stuff off the floor to give you more room to smash your goals.
The cotter pin offers extra security and stability while making it easy to move around until you find the perfect spot, and allows you to fit more onto your rack, taking up only one hole on the upright (compared to bolt-on plate pegs, for example, that use multiple holes to mount). The black powder coating offers rust resistance.
As a bonus, you can use it for a step-up to reach the pull-up bar on a rack that's a bit too tall for you, or to help you do one more set of negative pull-ups.
Choose the utility horn that corresponds with your rack configurations and hole size.
$39.99+ ADD -
Vertical Barbell Holder
Vertical Mount Barbell Holder Rack Attachment
Ready to set a PR in home gym organization? Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back of your uprights.
Two bolts offer easy mounting, while an inner liner protects your barbell.
The black powder coat offers rust resistance, and the 220lb max capacity can handle your barbell, even if you use it as a makeshift coat rack (please don't).
Choose the Vertical Mount Barbell Holder that corresponds with your power rack measurements. Hardware included.
IMPORTANT: If your ceiling is less than 9 feet high, you may find using the Barbell Holder challenging with a standard barbell - please keep this in mind prior to purchasing.
Download Vertical Mount Barbell Holder Rack Attachment - Hydra Product Manual
Download Vertical Mount Barbell Holder Rack Attachment - Manticore Product Manual$69.99+ ADD -
5" Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
Download Bolt-On Plate Pegs - Hydra 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Hydra 13" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 13" (Pair) Product Manual$49.99+ ADD -
13" Bolt-on Plate Pegs
Bolt-On Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
Get locked and loaded with bolt-on plate pegs (don't worry, these are easy to install and remove as needed). Options range from 5" to 13" loadable sleeves designed to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading. Choose the plate pegs that fit your power rack.
On average, each 13" Manticore peg can fit eight 45lb Mighty Grip Plates or four 45lb Crumb Bumpers. On average, each 5" Manticore peg can fit the following Mighty Grip Plates: three 25lb plates, five 10lb plates, or five 5lb plates.
IMPORTANT: Sold in pairs. Hardware included.
Download Bolt-On Plate Pegs - Hydra 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 5" (Pair) Product Manual
Download Bolt-On Plate Pegs - Hydra 13" (Pair) Product Manual
Download Bolt-On Plate Pegs - Manticore 13" (Pair) Product Manual$54.99+ ADD -
Change Plate Pegs
Change Plate Storage Pegs
Keep your change plates conveniently stored and accessible to bust through your next plateau.
With 8" loadable sleeves, Change Plate Pegs bolt onto your rack uprights for easy access to your Olympic change plates.
Triple pegs for additional storage to keep your fractional plates organized and ready for your next 1lb PR. Trust us-it counts! You can throw resistance bands and other accessories on there, too, if you want; we aren't checking.
Easy installation with two bolts; hardware is included. Select the Change Plate Pegs that correspond with your power rack.
The Manticore version comes with UHMW protection for your uprights, and rubber stoppers to prevent your plates from hitting the mounting bolt heads.$69.99+ ADD -
Pin Plate Pegs
Pin Plate Pegs
Keep your weight plates organized and easy to access with rack-mountable plate pegs.
These convenient drop-in pegs are adjustable in seconds with sleeves to fit Olympic-sized weight plates.
Black powder coat protects your plates while reducing friction for easy loading and unloading.
Choose the plate pegs that fit your power rack. Sold in pairs.
- 2.3" version: 9" loadable length
- Hydra version: 12.5" loadable length
- Manticore version: 12.5" length
$59.99X OUT OF STOCK -
Utility Hook
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the center upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.
$10.99X OUT OF STOCK -
Utility Hook 2x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the center upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.
$21.99X OUT OF STOCK -
Utility Hook 3x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the center upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.
$29.99X OUT OF STOCK -
Utility Hook 10x
Utility Hook
The Utility Hook is the smallest—but mightiest—gym storage solution.This solid steel s-hook easily slides into tubing holes up to 11 gauge (2.9mm thick).Organize your cable attachments along the center upright of your All-in-One Trainer. Hang lifting chains off the sides of the rear upright on your Cable Tower. Store your barbell across two hooks on a 76" wide Hydra Universal Storage System.And this is just the beginning. Beyond your gym's space restrictions, the only limit is your creativity. Don't be surprised if you get hooked.IMPORTANT: Fits all round holes on tubing up to 11-gauge (2.9mm) thick and is cross compatible with other brands as long as the gauges isn't lower than 11.
$54.99X OUT OF STOCK -
Storage Basket
Rack Attached Storage Basket
Tame gym clutter with the Rack Attached Storage Basket!This isn’t your grandma’s picnic basket. It’s crafted from 14-gauge steel and built to withstand the rigors of any serious gym environment.Thanks to the rugged design, all your fitness accessories are safe inside its fortress walls. Use a couple of Utility Hooks to hang your lever belt & lifting chains from the outside of the basket for even more #spacegainzMount it on your power rack, storage system, or wall studs.IMPORTANT: Comes standard with rack-mounting hardware for tubing with ⅝” holes. Wall mounting hardware not included.$69.99X OUT OF STOCK
Rack
Rack Attachments
Storage Attachments
Robust. Commanding. Everything you ever dreamed of in a power rack.
Product Features
-
SUPER STORAGE EXTENSION
Plates, attachments, pegs, or even pulls - the additional storage section is your ultimate lifting champion. But unlike your last workout partner, it will always be there to support you (thanks for nothing, Achilles).
-
NO FLOOR BOLTING
The sheer size of this power rack means you won't have to bolt it into your floor (or hire a contractor). The larger contact surface area makes the rack sturdier for racking/unracking your bar, during pull-ups, and when doing dips.
-
NEVER UPGRADE AGAIN
You know what they say: buy once, cry once. The Manticore is highly customizable with its modular components, so it can adapt with you through every phase of your life. It's the last rack you'll ever need — which takes the sting out of the investment.
Product Details
Like a mullet haircut, the 6 Post Power Rack is all business-in-the-front, party-in-the-back.
Its 1,000-pound capacity outlasts heavy squats, handles big bench presses and withstands chin-ups with 8 kids hanging onto your waist. The uprights measure true 3" x 3" which is EXACTLY 76.2mm x 76.2mm, instead of the typical 75mm x 75mm uprights of other brands' imported racks.
By matching the same tubing specs as many of our American competitors, you can mix and match attachments freely without needing to stick to one brand - hello, open ecosystem! You can even side-mount your 5/8" attachments (as long as they're destined for true 3" x 3" tubing) using the side keyhole slots; perfect if you prefer the more economical Hydra rack attachments, now that's a fairy tale come true!
Built with modular components, so you can expand later or divide it into two smaller Manticore racks to accommodate a new home gym space or team workouts with your swolemate.
Compatible with all Manticore rack attachments, like the hyper-versatile Manticore Lat Pulldown.
IMPORTANT: The Manticore series of power racks are TRUE 3" x 3" tubing with 1-inch holes, so only Manticore attachments & non-B.o.S. attachments made precisely for 76.2mm x 76.2mm uprights with 1-inch holes will fit.
PRODUCT SPECS
General | |
---|---|
Weight (lb) |
|
Total Length (Depth) |
|
Total Width |
|
Total Height |
|
Rack Pin |
|
|
|
Construction | |
Upright Specs |
|
Hole Size |
|
Hole Spacing |
|
Steel Thickness |
|
Coating |
|
Weight Capacity |
|