Weight Stack Pin
Product Features
-
![]()
EASY MICRO LOADING
Just select your desired weight, and slide the weight stack pin into an open slot above the selector pin itself. Secure the hitch pin at the back, slip on your weight plates, add the spring collar and VOILA - you're ready to lift!
-
![]()
EXTRA-SECURE DESIGN
The 4.25" long centre rod goes completely through the weight stack & locks in with a hitch pin with a spring collar for extra peace of mind. Because the only plate you ever want flying towards you is a plate of tacos.
-
![]()
GUARANTEED TO FIT
It's guaranteed to fit on our Functional Trainer, Cable Tower with Weight Stacks and Lat Pulldown and is compatible with most non-B.o.S. cable machines that have a weight stack depth no greater than 4" & uses a 10mm diameter selector pin.
Product Details
Make micro loading on your cable machine a piece of cake with the Weight Stack Pin! Between lateral raises and bicep curls, a full 10lb weight jump can take you from "Well, this is easy" to "WHY IS THIS SO HARD?!"
Your isolation muscles crave sensible loading and with this cable attachment, you can stimulate them to grow instead of annihilating them altogether. The weight stack pin's sleeve fits Olympic weight plates, so you don't need to go out and buy special plates. And if you already have a set of fractional plates, even better!
Oh, and don't worry about scratches. This thing is coated in chrome for extra durability against abrasion.
IMPORTANT: The Weight Stack Pin was designed for micro loading up to 20lbs only. Loading beyond the 20lb limit could permanently damage your weight machine. NEVER use the Weight Stack Pin as a replacement for the selectorized pin.
Guaranteed to fit on:
It's also compatible with most non-B.o.S. cable machines, provided the depth of the weight stack plates is NOT greater than 4" and fits a selector pin with a 10mm diameter rod.
Included by default with the Lat Pulldown Machine.
PRODUCT SPECS
| General | |
|---|---|
Weight (lb) |
|
Total Length |
|
Sleeve Length |
|
Rod Length |
|
Sleeve Diameter |
|
Rod Diameter |
|
Max Capacity |
|
|
|
|
- AAnonymousVerified BuyerRated 5 out of 5 stars1 year agoWorks well with my Inspire Fitness FTX machine
I got these pins to use with my Inspire Fitness FTX cable machine I bought through Costco. The pins are a little shorter and slightly smaller diameter than the ones that came with my machine, but they still work fine. I haven't used them with more than 5lbs loaded onto the pin, but they have been secure and haven't fallen out or started to back out of the weight stack when in use. The quality seems very good and it's hard to find a more affordable loadable pin. I find they are very useful especially when working on weaker muscle groups, like my shoulders doing lateral raises. It's nice to be able to add a little more weight without stepping up to the next plate in the stack. I use fractional weight plates to really fine tune the weight. Like the description mentions, the pins themselves do weigh a little too, so sometimes it works to just put the loadable pin into the stack and micro increase the overall weight that way. I'm really happy with these and would definitely recommend them.
Bells of Steel USAHi there , Thank you so much for the kind words of encouragement and for the 5 star review, we highly appreciate it ! We hope you continue to love your new gear and we wish you the best. Sincerely, Marcus & the BoS team - TBTina B.Verified BuyerRated 5 out of 5 stars18 hours agoGreat pin
Does exactly what it's supposed to do !
Thank you !
Bells of Steel USA19 seconds agoThanks a ton for the awesome review, Tina! We're pumped to hear our product is delivering on its promise and meeting your needs. Simple and effective is what we strive for. Keep crushing those workouts!
Yours in strength,
The B.o.S. Crew - JSJordan S.Verified BuyerRated 3 out of 5 stars3 days agoCompatibility issues with the cable tower
I wanted a simple and affordable solution to add 2.5 and 5lb plates to my cable tower, so I went with this stack pin. The Bells of Steel website says it's compatible, and technically it is... the issue is that when the weight stack travels past the center pulleys, it comes into contact. It isn't the biggest issue, but I'm concerned that over time it'll cause some problems. I've already had some minor cable twisting where these pulleys became angled, but have mostly remedied that issue.
Also - I find that the pin is slightly angled from the portion that holds my 2" plates, which causes the fit to be less snug against the weight stack. The price was unbeatable from any of the competition, but I wish there was a better solution.
Bells of Steel USAYesterdayHey Jordan,
Thanks for sharing your thoughts with us. We’re really sorry to hear about the compatibility issues you're experiencing with your weight stack pin. While it should fit snugly, we understand that the angled fit and contact with the pulleys aren’t what you hoped for. Your feedback is super valuable, and we’ll dive into making improvements.
Please reach out to our team at support@bellsofsteel.com to make things right and to help sort out the trouble you’re having. Thanks for bringing this to our attention — we’re on it like a lifter on a new PR.
Yours in strength,
The B.o.S. Crew - SMSteven M.Verified BuyerRated 5 out of 5 stars2 weeks agoI looked,,,,I bought....
Needed weight Stack pin. This one looks great and works great...Thanks guys,,,Steve...
- MHMeredith H.Verified BuyerRated 5 out of 5 stars1 month agoWeight Stack Pin works great!
I have the Bells of Steel weight stack Functional Trainer & every stack of weight is 10 lbs. This Pin helps me get to the next 10 pounder by adding my 2 1/2 or 5 lb Olympic Weights on, because I'm in between the two weight stack. It's really made a difference!!!
Bells of Steel USA1 month agoHey Meredith, Thanks for the 5 star review! Happy lifting! Yours in strength, BOS Crew
